RebelCell 12V DC STABILIZER 3A

Short Description

Converts voltage of the Rebelcell 12V25 12v35 12V50 12v70 and 100 Angling li-ion battery to a suitable voltage for use with fish finders with a maximum entry voltage of 16V (like the Raymarine Dragonfly).

Use: 12V fish finders with a maximum entry voltage up to 16V like the Raymarine Dragonfly.

47.00

Product Details

RebelCell 12V DC STABILIZER 3A

The 12V DC Stabilizer 3A converts the voltage of all Rebelcell 12V batteries to a stable 12V output voltage. This enables you to use your Rebelcell battery with (electronic) equipment that requires a stable 12V output or has a different operating voltage range than your battery. Using the Stabilizer can increase the runtime and ensure trouble-free operation of your equipment.

Application: depth sounders, LED lighting, camera equipment, GPS navigation equipment
Waterproof: filled up with epoxy resin, IP65 waterproof, can be used outdoors in wet surroundings, like a fishing boat or kayak.
Built-in abuse protection: switches off automatically in case of short circuit, high temperature, high voltage and deep discharge. With integrated 10A fuse in + output wire to protect your equipment.
Included: RebelCell 12V DC STABILIZER 3A, 1x Anen PA-45 connector

PLEASE REVIEW THE BELOW INFORMATION BEFORE COMPLETING YOUR ORDER

1Only use with Rebelcell 12V batteries with a working voltage between 9.0V and 18.0V. Use with unsuitable batteries can damage the converter. Never use if the voltage of your battery is below 9.0V. The undervoltage will cause the converter to heat up rapidly and will lead to irreversible damage to your converter.
2Pay attention to the polarity when connecting to your battery (+ wire to the + of the battery and – wire to the – of the battery). Reversing polarity may damage your converter and your equipment.
2Only connect to 12V equipment with a power consumption of less than 3A. If you connect equipment that draws more power you will damage the converter!.
3Never install or place the 12V DC Stabiliser on the battery. The 12V DC Stabiliser can become very hot and damage your battery. Fix the 12V DC Stabiliser on a metal (aluminum) plate with screws for safe use and additional heat dissipation.